Southwestern Industries Proto Trak Quik Cell

$10500

Southwestern Industries Proto Trak Quik Cell Image
SOUTHWESTERN INDUSTRIES Proto Trak CNC VERTICAL MILL 3 axis

 

MODEL: QUIK CELL, S/N: 028B11188, NEW:2002
 
Mill has New Programming Pendent from Southwestern Industries  
 
Mill has been disassembled, cleaned, verified oil gallies are clean and oiling correctly.
 
Calibrated using gauge from Southwestern Industries.

SPECIFICATIONS:

TABLES SIZE …………………. 19-5/8″ X 14″
T-SLOTS …………………….. 5/8″ x 4 x 3-1/8″
TRAVELS:
TABLE  (X-AXIS) ……………… 14″
SADDLE (Y-AXIS) ……………… 14″
HEAD  (Z-AXIS) ………………. 18″
SPINDLE TAPER ……………….. # Cat40 ( Can use NMTB 40 if draw bar is changed)
SPINDLE SPEED RANGE ………….. 250 – 5000 RPM
SPINDLE CENTER TO COLUMN FACE …. 15-3/4″
SPINDLE MOTOR ……………….. 2 HP
MAX WEIGHT OF WORKPIECE ………. 880 LBS
MAX SPINDLE NOSE TO TABLE …….. 18″
APPROXIMATE DIMENSIONS ……….. 31″L x 54″W x 80″H
APPROXIMATE MACHINE WEIGHT ……. 2,750 LBS.
EQUIPPED WITH:
PROTO-TRAK MODEL: QMV CONTROL,
   AUTO GEOMETRY ENGINE, LINEAR & CIRCULAR INTERPOLATION,
   THREE AXIS, ROTATE OR MIRROR,
   RUN CAM & MUCH MUCH MORE!
BALL SCREWS & SERVO MOTORS FOR X,Y & Z AXES
 AC SPINDLE DRIVE
HANDWHEELS
Kurt Power Lock POWER DRAW BAR
HARDENED & GROUND WAYS
AUTOMATIC LUBRICATION SYSTEM
Fog Buster COOLANT SYSTEM
2 HORSE POWER SPINDLE MOTOR

Mill is powered and can be tested 

Will load on truck or trailer at no charge.

Southwestern Industries Proto Trak Quik Cell

$10500

Southwestern Industries Proto Trak Quik Cell Image
SOUTHWESTERN INDUSTRIES Proto Trak CNC VERTICAL MILL 3 axis

 

MODEL: QUIK CELL, S/N: 028B11188, NEW:2002
 
Mill has New Programming Pendent from Southwestern Industries  
 
Mill has been disassembled, cleaned, verified oil gallies are clean and oiling correctly.
 
Calibrated using gauge from Southwestern Industries.

SPECIFICATIONS:

TABLES SIZE …………………. 19-5/8″ X 14″
T-SLOTS …………………….. 5/8″ x 4 x 3-1/8″
TRAVELS:
TABLE  (X-AXIS) ……………… 14″
SADDLE (Y-AXIS) ……………… 14″
HEAD  (Z-AXIS) ………………. 18″
SPINDLE TAPER ……………….. # Cat40 ( Can use NMTB 40 if draw bar is changed)
SPINDLE SPEED RANGE ………….. 250 – 5000 RPM
SPINDLE CENTER TO COLUMN FACE …. 15-3/4″
SPINDLE MOTOR ……………….. 2 HP
MAX WEIGHT OF WORKPIECE ………. 880 LBS
MAX SPINDLE NOSE TO TABLE …….. 18″
APPROXIMATE DIMENSIONS ……….. 31″L x 54″W x 80″H
APPROXIMATE MACHINE WEIGHT ……. 2,750 LBS.
EQUIPPED WITH:
PROTO-TRAK MODEL: QMV CONTROL,
   AUTO GEOMETRY ENGINE, LINEAR & CIRCULAR INTERPOLATION,
   THREE AXIS, ROTATE OR MIRROR,
   RUN CAM & MUCH MUCH MORE!
BALL SCREWS & SERVO MOTORS FOR X,Y & Z AXES
 AC SPINDLE DRIVE
HANDWHEELS
Kurt Power Lock POWER DRAW BAR
HARDENED & GROUND WAYS
AUTOMATIC LUBRICATION SYSTEM
Fog Buster COOLANT SYSTEM
2 HORSE POWER SPINDLE MOTOR

Mill is powered and can be tested 

Will load on truck or trailer at no charge.