Leblonde 19 x 54 Lathe with Taper Attachment

$4650

Leblonde 19 x 54 Lathe with Taper Attachment Image

For Sale (Grafton Ohio)

19″ X 54″
LEBLOND ENGINE LATHE
(This lathe DOES come with a full,back splash chip gaurd not shown in pictures)

SERIAL ……………………… 8F-2484
MODEL ………………………. REGAL
SWING OVER BED ………………. 19″
SWING OVER CROSS SLIDE ……….. 12-1/4″
DISTANCE BETWEEN CENTERS ……… 54″
HOLE THRU SPINDLE ……………. 1-3/4″
SPINDLE SPEEDS ………………. 25 TO 1000 RPM
FEEDS ………………………. (66) .0018 TO .104 IPR
THREADS …………………….. (66) 2 TO 112 TPI

CHUCK ……………………….
8″ 3 JAW CHUCK

TAPER ATTACHMENT …………….. YES

HARDENED REPLACEABLE WAYS …….. YES

TREAD DIAL ………………….. YES

SPINDLE MOTOR ………………..
10 HORSEPOWER
Machine has just been serviced.

Compound , Cross slid and Carriage have been removed cleaned, flushed and verified oiling gallies are clean and oiling as the should.

TAPER ATTACHMENT HAS BEEN DISASSEMBLED CLEAN LUBED AND ADJUSTED.

*May inspect under power.

Will load on truck or trailer at no charge

Leblonde 19 x 54 Lathe with Taper Attachment

$4650

Leblonde 19 x 54 Lathe with Taper Attachment Image

For Sale (Grafton Ohio)

19″ X 54″
LEBLOND ENGINE LATHE
(This lathe DOES come with a full,back splash chip gaurd not shown in pictures)

SERIAL ……………………… 8F-2484
MODEL ………………………. REGAL
SWING OVER BED ………………. 19″
SWING OVER CROSS SLIDE ……….. 12-1/4″
DISTANCE BETWEEN CENTERS ……… 54″
HOLE THRU SPINDLE ……………. 1-3/4″
SPINDLE SPEEDS ………………. 25 TO 1000 RPM
FEEDS ………………………. (66) .0018 TO .104 IPR
THREADS …………………….. (66) 2 TO 112 TPI

CHUCK ……………………….
8″ 3 JAW CHUCK

TAPER ATTACHMENT …………….. YES

HARDENED REPLACEABLE WAYS …….. YES

TREAD DIAL ………………….. YES

SPINDLE MOTOR ………………..
10 HORSEPOWER
Machine has just been serviced.

Compound , Cross slid and Carriage have been removed cleaned, flushed and verified oiling gallies are clean and oiling as the should.

TAPER ATTACHMENT HAS BEEN DISASSEMBLED CLEAN LUBED AND ADJUSTED.

*May inspect under power.

Will load on truck or trailer at no charge