Hardinge Precision Tool Room Lathe HLV-H

$12500

Hardinge Precision Tool Room Lathe HLV-H Image

Hardinge 11” x 18” Precision Toolroom Lathe, Model HLV-H

Demo video of operation

Lathe is in very good condition. and everything moves smooth and free as it should.
Lathe was just serviced Including
Verified that oiler for saddle is working
Spindle bearings have been Cleaned and Repacked with correct Lube.
New Cross Feed Screw and Brass Nut
Cross Slide has been Scraped so fit is near Perfect
New Variable Speed Drive Belts
Electrical contacts have been cleaned.

Lathe will come witha an Aloris Tool Post with Tool Holders
Drill Chuck
Morris Taper Center
And an Assortment of 5C Collets
Work Light
Coolant pump

Specifications:
Swing Over Bed 11”
Swing Over Carriage 9”
Swing Over Cross Slide 6”
Distance between Centers 18”
Hole Thru Spindle 1 ¼”
Compound Slide Travel 3”
Power Feed Range ¼” – 7” per Minute
Spindle Capacity 1 1/4″ with 5C Collets taper
Tailstock Spindle Diameter 1 3/8”
Tailstock Spindle Travel 3 ¾”
Tailstock Spindle Taper No. 2 MT
Leadscrew Diameter 1” – 8 Thread
Range of Threads in Gear Box 11 – 108
Number of Thread Changes in Gear Box 27
Weight 1,700 lbs

Lathe is powered and can be Tested
Any question Please Call Brandon

Hardinge Precision Tool Room Lathe HLV-H

$12500

Hardinge Precision Tool Room Lathe HLV-H Image

Hardinge 11” x 18” Precision Toolroom Lathe, Model HLV-H

Demo video of operation

Lathe is in very good condition. and everything moves smooth and free as it should.
Lathe was just serviced Including
Verified that oiler for saddle is working
Spindle bearings have been Cleaned and Repacked with correct Lube.
New Cross Feed Screw and Brass Nut
Cross Slide has been Scraped so fit is near Perfect
New Variable Speed Drive Belts
Electrical contacts have been cleaned.

Lathe will come witha an Aloris Tool Post with Tool Holders
Drill Chuck
Morris Taper Center
And an Assortment of 5C Collets
Work Light
Coolant pump

Specifications:
Swing Over Bed 11”
Swing Over Carriage 9”
Swing Over Cross Slide 6”
Distance between Centers 18”
Hole Thru Spindle 1 ¼”
Compound Slide Travel 3”
Power Feed Range ¼” – 7” per Minute
Spindle Capacity 1 1/4″ with 5C Collets taper
Tailstock Spindle Diameter 1 3/8”
Tailstock Spindle Travel 3 ¾”
Tailstock Spindle Taper No. 2 MT
Leadscrew Diameter 1” – 8 Thread
Range of Threads in Gear Box 11 – 108
Number of Thread Changes in Gear Box 27
Weight 1,700 lbs

Lathe is powered and can be Tested
Any question Please Call Brandon