Proto Trak DPM 3 Southwestern Industries AGE3 Control Great Condition

$15500

Proto Trak DPM 3 Southwestern Industries AGE3 Control Great Condition Image

Southwestern Industries
Proto Trak DPM 3 Vertical Bed Mill
with A.G.E. 3 CNC Controls

Demo video of operation

This is a very nice machine with Original Paint
The following Service has just been Completed

All new bearings in variable speed head Including New variable speed belt.
Table removed and cleaned.
All oil gallies have been cleaned, flushed, and verified oiling correctly.
Ball screwed cleaned and flushed with new oil.
New rubber lines replaced to ball screws
Mill has been adjusted and calibrated using Southwestern Industries Calibration Fixture, and is ready for Production

Way covers have been removed for pictures. They will be included with machine.

This is a very nice Mill that runs smooth and quite.
Video of machine operation can be shared upon request.

S/N-97-2899

Table size 50″ X 10 ” ~ with 3 t-slots
Travel X-29 / Y-16″ / Z-24.150″
Maximum weight of work piece: 1,320 LBS
Milling head swivels right & left: 90 Degrees
Quill travel: 5″
Spindle taper: #40 N.S.T
(3) power quill feeds: .002; .004; .006 IPR
Distance, center-line of spindle to face of column: 17.3″
Variable spindle speeds 70-4200 RPM
Full 3-axis CNC machining control or hand wheels for manual operation
Precision and ground ball screws installed in table(X), saddle(Y), and column(Z)
3 H.P. spindle drive motor
Approximate Weight: 4,200 Lbs.
Approximate Dimensions: 71″ x 71″ x 84″ H
Equipped With:
Dual floppy disc drives
RS 232 port
Leveling pads
Remote Stop Go Switch
Coolant Pump
Automatic lubrication system
(cleaned,flushed, and filled with new oil)

Any questions please Call Brandon
Machine is powered and can be tested.

Will load on truck or trailer at no charge.

Proto Trak DPM 3 Southwestern Industries AGE3 Control Great Condition

$15500

Proto Trak DPM 3 Southwestern Industries AGE3 Control Great Condition Image

Southwestern Industries
Proto Trak DPM 3 Vertical Bed Mill
with A.G.E. 3 CNC Controls

Demo video of operation

This is a very nice machine with Original Paint
The following Service has just been Completed

All new bearings in variable speed head Including New variable speed belt.
Table removed and cleaned.
All oil gallies have been cleaned, flushed, and verified oiling correctly.
Ball screwed cleaned and flushed with new oil.
New rubber lines replaced to ball screws
Mill has been adjusted and calibrated using Southwestern Industries Calibration Fixture, and is ready for Production

Way covers have been removed for pictures. They will be included with machine.

This is a very nice Mill that runs smooth and quite.
Video of machine operation can be shared upon request.

S/N-97-2899

Table size 50″ X 10 ” ~ with 3 t-slots
Travel X-29 / Y-16″ / Z-24.150″
Maximum weight of work piece: 1,320 LBS
Milling head swivels right & left: 90 Degrees
Quill travel: 5″
Spindle taper: #40 N.S.T
(3) power quill feeds: .002; .004; .006 IPR
Distance, center-line of spindle to face of column: 17.3″
Variable spindle speeds 70-4200 RPM
Full 3-axis CNC machining control or hand wheels for manual operation
Precision and ground ball screws installed in table(X), saddle(Y), and column(Z)
3 H.P. spindle drive motor
Approximate Weight: 4,200 Lbs.
Approximate Dimensions: 71″ x 71″ x 84″ H
Equipped With:
Dual floppy disc drives
RS 232 port
Leveling pads
Remote Stop Go Switch
Coolant Pump
Automatic lubrication system
(cleaned,flushed, and filled with new oil)

Any questions please Call Brandon
Machine is powered and can be tested.

Will load on truck or trailer at no charge.